# Elecrow ESP32 7.0-inch display, square line export

**URL:** <http://forum.squareline.io/t/elecrow-esp32-7-0-inch-display-square-line-export/2504>\
**Category:** How to\
**Created:** [February 8, 2024, 11:04am UTC](http://forum.squareline.io/t/elecrow-esp32-7-0-inch-display-square-line-export/2504 "2024-02-08T11:04:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![m0guy](http://forum.squareline.io/letter_avatar_proxy/v4/letter/m/ce7236/32.png) [@m0guy](http://forum.squareline.io/u/m0guy)\
**Post date:** [February 8, 2024, 11:04am UTC](http://forum.squareline.io/t/elecrow-esp32-7-0-inch-display-square-line-export/2504/1 "2024-02-08T11:04:33Z")

</div>

### What do you want to achieve?

I’m trying to create a UI using SquareLine studio, and then write it to my Elecrow ESP32 7.0-inch display.

### What have you tried so far?

I can create a UI or use one of the demo ones, set the size to 800x480 and then export “project template”. I can then open this in Arduino IDE, set to ESP32S3 Dev Module, and write it to the screen without issue. I can then see via the serial that it’s been written and it boots up. However the screen is always blank.

In the template I see the readme file which references editing the “User\_setup.h” or “User\_Setup\_Select.h” files. which when I look in there I can’t see the correct line to use for my screen " Elecrow ESP32 7.0-inch display"

Can some one please let me know what I need to change on this template to have it work on this screen?

### Others

- **SquareLine Studio version:**
- **Operating system:**
- **Target hardware:**

---

<div class="post-metadata">

**Author:** ![Hermit](http://forum.squareline.io/user_avatar/forum.squareline.io/hermit/32/971_2.png) [@Hermit](http://forum.squareline.io/u/Hermit)\
**Post date:** [February 12, 2024, 3:03pm UTC](http://forum.squareline.io/t/elecrow-esp32-7-0-inch-display-square-line-export/2504/2 "2024-02-12T15:03:04Z")

</div>

This display is not contained in the TFT\_eSPI display-driver library exported by the SquareLine Studio Arduino project. So you’ll need to search for the display-driver elsewhere. Maybe you’ll get more info from Elecrow, but in any way, we advise first trying to build a built-in LVGL demo/example first and if it works, you can replace/add the UI folder with the one exported from SquareLine Studio.