# no .ino file generated

**URL:** <http://forum.squareline.io/t/no-ino-file-generated/5702>\
**Category:** Bugs\
**Created:** [March 11, 2025, 11:06am UTC](http://forum.squareline.io/t/no-ino-file-generated/5702 "2025-03-11T11:06:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Valvolo](http://forum.squareline.io/user_avatar/forum.squareline.io/valvolo/32/1722_2.png) [@Valvolo](http://forum.squareline.io/u/Valvolo)\
**Post date:** [March 11, 2025, 11:06am UTC](http://forum.squareline.io/t/no-ino-file-generated/5702/1 "2025-03-11T11:06:01Z")

</div>

### What do you want to achieve?

have the .ino file IOT to load into the Arduino IDE

### What have you tried so far?

changed arduino board setup, and LVGL version

### Screenshot or video

 ![image](http://forum.squareline.io/uploads/default/original/2X/5/5a0a36eeb34d3aeacaea40d8a9cf89b5b5a1e252.png)

### Others

- **SquareLine Studio version:** 1.5.0
- **Operating system:**
- **Target hardware:** M5stack DIAL

---

<div class="post-metadata">

**Author:** ![hjani](http://forum.squareline.io/user_avatar/forum.squareline.io/hjani/32/1744_2.png) [@hjani](http://forum.squareline.io/u/hjani)\
**Post date:** [March 12, 2025, 3:47pm UTC](http://forum.squareline.io/t/no-ino-file-generated/5702/2 "2025-03-12T15:47:47Z")

</div>

You have exported the project into the squareline data folder, which is wrong. You have to export your project into an empty arbitrary folder. If you want to have ino file generated, then you have to select “Arduino with TFT\_eSPI”, but this will require extra work to support the M5stack DIAL. We will make the official support for this board soon. Thank you for your patience!
